Energy Management

How Does HVAC Maintenance Impact Energy Savings

Energy Management / By / 2 Comments

Have you observed an increase in your HVAC costs? ACCORDING TO THE DEPARTMENT OF ENERGY, while HVAC energy usage did not itemize on utility charges, most buildings spend approximately thirty-eight percent of their total energy usage on heating and cooling payments. The rest of the energy usage divides into lights, security, running mechanical equipment, like elevators and escalators, and running computers and office equipment. Therefore, when you see an unexpected rise in your energy usage and your bill, it’s reasonable to believe it’s due to your HVAC system not running efficiently, and the number one reason HVAC systems fail to run efficiently is lack of maintenance. In other words, your lack of HVAC maintenance negatively reshapes your energy savings and bottom line.

Why Companies Should Perform Preventative Maintenance

Instead of reactive maintenance, businesses should be performing preventative care, which is regular maintenance that operates according to a schedule. The essential type of preventive maintenance is reconstructing the air filters regularly and scheduling HVAC inspections twice a year with an HVAC contractor, like BridgeThings, serving India-wide. Maintenance reviews secure coolant levels are optimal, all the components are operating within factory specs, and all the wiring is in good condition and supplies the correct amount of voltage to the unit. It can also involve cleaning the interior and exterior of the company and performing duct cleaning, which removed dust and debris from inside the ducts that can contribute to indoor allergy symptoms and poor air quality. If obstacles find during these inspections, like leaking coils, improperly calibrated and programmed thermostats, and fans that aren’t functioning, they can repairs promptly so that the useful life of the HVAC system isn’t affected and the unit continues to function optimally.

It estimates that organizations and industries that perform HVAC maintenance regularly lower their overall energy usage by between 10 and 20 percent, which indicates you’ll save money on your monthly operational costs and improve your profitability. 

HVAC Maintenance for Energy Savings

Implementing HVAC maintenance to deliver maximum energy savings is possible, and it’s almost easy to get started. The primary action is deciding to move from reactive maintenance to preventative maintenance.

1.Research Your HVAC Repair Bills

In some situations, you may have a problem convincing the building owner or HOA that a preventative maintenance program is required. If you disbelieve this will be a problem, you can examine all your past HVAC repairing bills and sum up the totals for the last 12 or 24 months. There’s a good chance that if you used that same amount of money into a preventative maintenance plan, you’d see a reduction in costs over the course of the coming 12 months, especially when you think that a lack of maintenance can lead to the need to replace your commercial HVAC unit completely.

2.Discover the last time the HVAC system was inspected

It’s essential to discover when the last review has happened on your HVAC system. If the answer is greater than 12 months ago, the last time it broke or never, your unit is overdue for a professional review. If you’re not sure about commercial HVAC maintenance, take a walk through your building. Are some rooms freezing while others are hot? Have your indoor allergy symptoms raised? Does your building feel muggy even when the HVAC system is running? These are all signs that your HVAC unit isn’t operating efficiently.

3.Make Some Basic Maintenance

There are specific duties to be performed by maintenance staff. These involve changing the air filter once a month, keeping the outside of the HVAC unit clean by removing garbage, twigs, and visible debris and checking the unit for holes, and looking for puddles around the unit. These essential duties can improve the efficiency of your HVAC system by assuring proper airflow around and through the system and by finding leaks promptly so that an experienced HVAC technician can investigate them. 

4.Design an HVAC Maintenance Plan

Next, build a preventative HVAC maintenance plan. This program will include things that should be done daily, weekly, monthly, quarterly, and yearly. For example, daily responsibilities would involve monitoring the system and scanning for parameters that are outside the normal range of operation. BAS systems help with these tasks. Seasonal tasks involve replacing the air filter and scheduling an HVAC tune-up or inspection to check for obstacles with the system, like a dirty chiller or cooling tower and leaking coils. These tasks may also include adding additives to the chiller water to inhibit pathogen growth and corrosion.

Improving HVAC Efficiency with Maintenance from BridgeThings

Here at BridgeThings, we can assist you on improving the energy efficiency of your HVAC unit with preventative maintenance that includes examining all the critical components of your rooftop unit, cleaning the interior and exterior of the business, and assuring that all your thermostats are set correctly. We can also design and install custom BAS systems to help you manage your heating, cooling, and ventilation equipment more efficiently.

To learn more about how we can help you save energy with HVAC maintenance and schedule an HVAC inspection, give us a call at 9948078292

How IoT-based Smart energy Metering Solution Benefits to the Utility Sector.

Energy Management / By / 3 Comments

An IoT Based smart energy meter accurately tracks utilities (Gas, electricity, and Water) energy consumption, and it works like a traditional meter. Unlike standard meters, it sends reading data directly to the service provider or client. 

Smart metering is a way for enterprises to preserve a record of how much energy they’re using so they can customize their usage if necessary.

 In Addition, to measure usage, smart meters record various data points on consumption, including when a resource is being used, how much is being used at a time, and where it’s being delivered. 

Many utility companies have adopted smart metering as an active method for data tracking usage across their customer bases to better determine costs and infrastructure needs. 

How can smart metering help businesses?

The primary advantage of smart metering is the specific knowledge of your business’s energy and other utility usage. Most smart meters coordinate directly into an interface that gives you a precise readout of your use, breaking it down by the time of day, day of the week, and month. Having this data at your fingertips can help you better assess your usage and keep up-to-date reports of your resource usage.

Understanding how much you’re wasting at any given time can inspire you to originate action to reduce consumption. Some interfaces compare usage with a monetary measurement, like a rating of watts per hour, supporting you to see how much electricity is fetching you by the minute.

Smart Energy meter solutions and capabilities  

Monitoring system
Monitoring

Remote monitoring assists in developing a greener ecosystem by accumulating hundreds and thousands of data and analyzing them to get more reliable performance. Intelligent remote monitoring in water meter systems assists in identifying leakage by smart sensors. These water-flow monitoring systems work on wireless networks where software analysis is completed at a centralized hub or control center.

Benefits of remote monitoring
  • Define the downtime
  • Keeps a record of the health status of your equipment
  • It helps to diminish the total cost of ownership
  • Enhances the productivity
Predictive Maintenance
predictive maintenance

All the transformers, utility center street by street, can be brought under the radar of monitoring through IoT’s predictive maintenance systems. In any significant electric interruption throughout history, unexpected maintenance problems play an important role. Emergency weather conditions also ruin the power facilities that take longer to recover.

Benefits of Predictive maintenance:
  • Recover quickly from catastrophic failure
  • Improve the equipment stability
  • Take sufficient preventive measures to minimize maintenance costs
Online Service & Maintenance solution
ontime service

Active maintenance claims the right solution at the right time. That is what IoT smart metering solutions allow the customers. Right from addressing critical concerns like high water pressure, natural calamities that interrupt day-to-day actions are prioritized accordingly.

Benefits

  • Fault management in smart energy meter solutions allows different levels of escalations.
  • Major and minor issues are consolidated by setting alert systems
  • Offering continuous supply through smart metering
  • Handles hazardous problems with no additional cost or time
Data Analytics through Reports & Dashboards
Analytics Dashboard

Business Intelligence tools like Tableau, Power BI, Etc.. are organized to provide in-depth data insights driven by the enormous data from the IoT sensor devices. 

Benefits

  • Advanced reporting software produces precise data for the customer in the form of reports.
  • Schedule reports that are categorized based on critical Key performance criteria and send to the appropriate team
  • Create a custom report on the go with no coding or prior knowledge to operate these tools
  • Get granular data concerning site-level or region-level crucial issues.

BridgeThings provides a prominent smart metering solution that assists in converting the current meters into an innovative metering solution. Whatever data is collected from the sensors is directly uploaded to the cloud. From there, we can remotely monitor the behavioral patterns, power consumption peak time, failure rate, factors causing slow down, etc., and then make an informed business decision.

How to save energy in commercial buildings?

Energy Management / By / Leave a Comment
Enery save in Commericial buildings

Energy consumption is rising over the years in Commercial buildings -shopping malls, hotels, retail, hospitals, office buildings, retail.
And Businesses don’t know how to save energy in Buildings. Below we will look at several sustainable methods through which businesses can become more energy-efficient and self-reliant.

Regular Audits

Regular Auditing in building premises is the primary step that helps to reduce energy consumption. It will give an idea to the resource which devices are consuming more power. 

New-Age technologies 

IoT is the latest technology that is used in Building premises to monitor energy efficiency. IoT can gather information from sensor devices embedded within the system. It Can collect data such as water flow, air pressure, light, and temperature. When integrates with BMS allows continuous monitoring, control & Provides Real-time analytics. It will enable increased productivity and cost savings, revenue benefits.

Focus on insulation

Like India, sunlight is heavy in a tropical country and can make a commercial building use more energy what it needed. Thus, by optimizing and strengthening its insulation, businesses save bills and become more energy efficient. The building’s external layer can be designed and enclosed with insulation materials to reduce heating and cooling needs. In addition to that, fixing doors and windows to avoid air leakages in existing buildings can be a significant step towards this.

HVAC maintenance

Regular preservation is necessary for HVAC systems to reduce costly repairs, Run Scheduled Preventative Maintenace programs, Use Smart technology, and Commercial thermostats to save energy costs..

Energy-Efficient Lighting:

The smart lighting solution is one of the best ways to reduce energy consumption. It integrates with sensors that assure enough light is required and go low on wattage otherwise.

Huge expansive parking lots are one great example where modern facilities require 24×7 lighting. Lighting unoccupied space is a complete waste of energy. BridgeThings smart lighting identifies unoccupied spaces and dims downlights to a preset lower wattage to ensure that energy is not wasted while the spaces are still lit. With wireless capabilities, our smart lighting solution can turn a set of lights into a virtual zone, that brightens up or dims down at once based on the sensor inputs. This ensures there is ample light available when a particular space is being used.  

In conclusion, every commercial building owner or facility manager wants to reduce energy costs and use sustainable and renewable resources. The ways mentioned above can help businesses to start their first step towards energy savings.

×